Видео

The videos advertising it seem to all be using a corded hammer drill

do you know how to factory reset them? I can't figure out which device it currently is paired to and I can't unpair it to pair it to another device. Hope that makes sense!

What modle is this and when was it made

I have a silver 05 FWD 3.3 V6, it just hit 230k and still runs like it’s brand new, mine has cloth power drivers seat, factory sunroof, third row seat. And my sunroof is the exact same way and it drives me nuts

As someone who used one you had no chance.. i have a video of me testing one with an impact sriver and wrench and i was trying to get it in one shot filming so got the bit at some wonky angles Eventually the nut part on mine stripped but heres my attempts. Wish theyd make one with a 1/2 hex head for a socket instead of the hex bits.. enjoy ruclips.net/video/zPIpBPhUoKc/видео.htmlsi=qhF5jCS8P5kdJsC3

I dig your Safety Shoes Mate!😃

Thank you I just bought one from Wal-Mart and came With no instructions..would not able to set it without watching your video

Yo istale ese acserio pero cuando pongo musi con mi celular se escucha como tranferencia de la radio

Thanks for the update bud!

Anyone know how many gallons the Xtra Large Top Paw dog pool holds? I can't find the info anywhere! I'm trying to calculate how much💦 water it takes to refill it 2 or 3 times a week = to the size of my well. This pool takes quite a WHILE to fill up. I just don't wanna dry out my well. And as you know the water gets dirty quick, so it's gotta be changed constantly. Dog life. 🤷 Also, this pool is awesome. Roomy for 2 big 🐕‍🦺dogs at once. I have a female,🥊 boxer, Diva, who's approach is dainty & delicate with everything, so she is NP. But my male Pitbull, Nova, is a🤪 maniac & won't let anyone cut his 💅 nails. So after spending almost 💸$60 on this pool, after opening it, I realized I needed to go to Lowe's & invest another 💸 $60 on a Traffic Master 5ft by 7ft (rubber/carpeted mat)🤦. Kinda like a garage mat. I traced the diameter of the pool around the mat & cut the mat to lay it down at the bottom of the pool (which fit damn near perfect), all from fear of his nails 💅puncturing the bottom. The bottom of the pool is made from decent tough material. But I don't want to have to buy another dog pool ever again. So i invested the extra 💲 to protect it. So far so good. And he absolutely 🥰 loves to do those little rapid 🐾paw paddling zoomies in the pool & 🛁bathtub, like he's 🏊swimming. And it still held up. Gotta make sure he doesn't do it to the sides though. I'm also in Connecticut. N.Branford area. Hope this helps anyone if they are worried about their 🐶dogs 💅nails as well. There's probably cheaper rubber mats you can buy to hack this problem. But I needed something REALLY tough, he's a STRONG heavy dog. And I still have yet to find a bouncy ball, that he can't destroy.

I'm up here on lake Champlain as well. Have you uses this motor any more? Looking at this for my 14' river boat. Also whats the measurement from the top of the transom mount to the planer board above the prop? Thanks.

An easier way to change the 2 bulbs on the front dome light is to carefully remove the plastic lens that has 4 clips about a 1/2 inch in from the corners. Use a very narrow knife to pry from these areas. Once one corner is released, move to the next. Much easier than removing the whole assembly. Also the bulbs in the car are not halogen bulbs but ordinary filament type bulbs which also get very hot. halogens would melt the plastic in no time... Just a FYI

Hi shon I can’t wait for the baby girl

This helped me today. Thank you!

I'm a little late, but mine has a tag that says "Do not use to inflate vehicle tire." Mine looks like yours. Maybe different model. 🤷‍♀️

I just spent $4,100 on my $4,200 Highlander Limited. I got it with 200,000 miles. I’m at 367,000 miles now, and this is the first thing I’ve done to it other than tires and brakes. I had to replace the electric engine fans, A/C condenser, vacuum hoses, and catalytic converter. (And some little shit.) The engine runs perfectly. I’ll never replace the timing belt or water pump unless 1) the belt breaks, or 2) the pump leaks. It’s not an interference engine, so why not get all of the life out of it?

Hi thanks for the info i have a 3.5 but thinking of upgrading is this a long shaft?

😂😂😂, this has to be a joke ... Cordless wouldn't do the job.

You did a great job with the final trim and I don't think anybody has that in their garden, so look at it As a gem.

Almost looks like a juniper and a spruce were grafted together as saplings.

is it available in India or not

Great video

Haha, I did not expect the all the love for Franentree, I may have to reconsider

I just bought one. My dogs had the plastic kind and has a crack so I invested in this.

🙋🏽‍♀️SAVE IT....💯🍃💚.

*OMG LOVE IT 💯 SAVE FRANKENTREE!!* 🙏🏻

Save the FrankenTree!!! 😂😂

thanks bro. your review help me a lot.

My wife just got me this for Father’s Day , I’m Happy. Is it worth it to buy the warranty??

Depends on how dry and what type of tree the wood is.Pine is knotty and heavily sapped and a soft wood,then that type of tree needs to dry for a while then that tool should work fine.But if it’s a hardwood tree like Oak and certain Maples,then most likely not.

bro i just bought my go pro..u saved me and gave u a sub

Just want you to know the good news of the Gospel. The bad news is that you and I (everyone) are sinners. And since God is Holy He doesn’t put up with sin. So sin leads to hell. The good news is God sent His Son, Jesus Christ, to die for our sins on the cross. This means Jesus paid the debt we owed but couldn’t pay. So if one repents and places faith (trust) in Jesus Christ they can be assured of heaven. I love you and so does God.

I'm no expert or mechanic on gas powered engines but what I know is that when you first start running a brand new gas powered engine, you have to first "break-in" (run the engine at half power or less while it takes time for it to get lubricated from the oil to fully lubricate the moving parts inside the engine.) the engine. The manual should tell you the break-in period of the engine, how long to run the engine, how many mileage it needs to run or how much gas need to be consume to get the engine broken-in or fully lubricated. When the engine is "broken-in" or fully lubricated, it is then when you can run it at full throttle or power but before that if you try to run it at full power before it's not fully lubricated or "broken-in", you may or will risk the engine ceasing or locking up all of a sudden while riding it and you may probably end up being thrown off the scooter from a dead stop.

Thank you

Very helpful video. I have a problem you didn't mention: The screw was put in so tightly that I can't turn it. I have changed bulbs in microwaves before. It's not rocket science, but whirlpool put the light is in a very awkward position (much too far back) and makes a simple chore a real pain.

Get a real hammer drill. Commonly referred to as SDS Drills. Then get an SDS to Keyed Chuck adapter. 🤷‍♂️🤷‍♂️🤷‍♂️

have you thought about swapping out the stock engine for bigger engine, say 63cc 2-stroke?

How sturdy are the base mounts?

Oh wow, not even using an pneumatic hammer, what a clown. You’d need a 1500w rotary pneumatic with at least 4.5 joules, hence the shanks they normally sell with 😂

2 is high speed low torque

V6 can pull up to 3500lb

Do you keep holding the throttle down during braking ? Or we release the throttle and only hold down the brake/R trigger ? Thank bro

Ole boy needs schooling on 2strokes he don't know

Thank you for not only explaining this far better than ANY of their documentation or forum posts, but for getting to the damn point and not making a 30 minute video about a 30 second process!

What screwdriver use regular or Philips? Tell me

If ya had an axe you would have been done a while ago.

Awww I would’ve had the same reaction. Love lil birdies. ❤

Thanks for sharing

We have the white shark and it's broken twice in about half a dozen uses. First time the charger broke. Now it shut off after 5 minutes and the battery has a crack in it. Probably overheated a cell and swelled up. Seems like inadequate quality for a saltwater environment.

its oil in the bottom end not grease